Enttec Pixel Triton
/ Equipment / Lighting Control
Enttec Pixel Triton
- Supports up to 8 Universes of DMX data
- 2 x 3-pin pixel outputs, 2 x EtherCON connectors (input/output) and 1 x IEC power connector
- Supports ArtNet 1/2/3 and sACN protocols
- Webpage Configuration
- Support wide range of Tape
With 2,048 DMX channels per output, you get a total of 4,096 DMX channel at your disposal from the Pixel Triton, allowing you to drive up to 1,360 individual RGB pixels. Still not enough? Then daisy chain your Tritons with RJ45 Ethernet connectors to extend your set-up.
The Pixel Triton comes in two voltage options – 12V (outputting 260W) or 24V (the full 300W). Due to the smart design, your refresh rate won’t suffer if you’re using the Triton at its limits.
With compact dimensions of 335mm (L) 129mm (W) 43mm (H) and a weight of 2.4kg, this device will fit snugly, mounting into any standard touring case. this high power LED pixel driver is ready to go whenever you are!
Specifications
- Category: LED Drivers & Controllers, Lighting Control
- Manufacturer: Enttec
- IP Rating: IP20
- Power Consumption (Watts): 300
- Type: Rack Mount
- Housing Colour: Black
- Input: IEC